Overview: if you’re looking for an effective simple solution for dealing with high levels of iron in your water, without doubt, try out Fleck Iron 2 80,000-Grain Water Softener. It’s a really highly rated, and it performs very well when it comes to dealing with a high amount of iron and manganese.
Before we begin looking at just how great the Fleck IRONPRO2 Pro combination is, there is some basic differentiation you should make between the 80,000-grain capacity and the 64,000-grain capacity Iron pro 2 softeners.
The 80,000 grain is unique in the sense that it’s able to remove the hardness of up to 85 grains per gallon. The grain capacity of a water softener is the amount of dissolved rock it’s able to remove before it needs to regenerate.
How much iron will this water softener remove?
Due to its iron filter, Fleck iron pro 2 is able to remove iron up to 8 ppm or milligrams per liter (mg/l) and 80 grains of hardness per gallon.
Bear in mind that one grain of hardness is equivalent to 1/7000 pound of rock, so if you have water whose level of hardness is very high, it will be able to remove the hardness without requiring to regenerate quickly, as explained in my **comprehensive water softeners buyers guide**
The Fleck IRONPRO2 Pro combination also has tons of great features. Due to its Fleck 5600SXT Digital Control Head, it regenerates automatically; it is able to treat water at the rate of 18 gallons per minute.
Lots of verified buyers mentioned that they really love the bypass valve which ensures that you don’t run out of water when it is regenerating.
It uses a special fine mesh resin that is able to filter iron better, and the special resin is able to eliminate limescale from hard water. It weighs 110 pounds, dimensions are 65 X 13 X 13 inches, and the color is almond.
On buying, it’s shipped in two big boxes and one smaller one. The big box contains the resin tank and the other the brine tank and another small box for the control valve.
Now before we start looking at installation, you should know that Fleck Iron Pro 2 comes with 10 years warranty for the tanks, 5 years warranty for the control head and 30 days satisfaction guarantee.
When it comes to installing this unit, you will require basic plumbing skills. If you are installing it at home that has never had a water softener, it might be a good idea to seek some help.
Having said that, it does come with great installation instruction that is easy to follow. On buying this unit, you get free phone tech support. Email assistance is always there from the tech support team.
The requirements for installation are incoming water pressure of between 20- 90 PSI at the point you’re going to install and temperature of 35-110 F to protect the system from freezing or overheating.
- Load the resin in its tanks( take care not to load it into the brine tank)
- Attach the control head by screwy it in.
- Set up the brine tank and add salt
- Set up the control head
- Then the inlet/outlet connection.
What I Don’t like
The Iron Pro 2 80,000 grains is for those looking to have the best solution for removing iron. It doesn’t come cheap, but in all fairness, this unit does offer a lot of benefits. In addition to softening water, it has a high capacity of removing iron, and Fleck control head is great, 80,000-grain capacity ensures that it can perform for a long time without needing to regenerate.
Bear in mind that this system is made by Fleck which the leading manufactures of water softeners in the market. So if you’re concerned about the price, You’re getting one of the most powerful water softeners. Having said that, if you’re wondering what are the downsides, for sure, the system does carry a hefty price tag, but you should consider that there are other solutions that cost three times. The installation is not that simple especially if you’re not that technically experienced. You might require the help of a plumber.
I’m not saying that Fleck IRONPRO2 Pro 2 combination is the perfect water softener, it does have some flaws, but that doesn’t mean that it will not do the job. So, without further ado lets jump in and check the pros and cons of this unit.
- Great control head valve (Fleck 56,000SXT)
- Removes the iron and Manganese 6 ppm
- Automatic regeneration
- 80,000-grain capacity
- DIY installation (includes free phone tech support)
- Bypass valve
- 5 years warranty of control valve
- 10 years warranty for brine tank and resin tank
- Installation can be complicated
- Some complained that getting resin into the tank was hard